Monday, 22 August 2016

Various Categories Under Which A Car Wash Edmonton May Fall Under

By Marie Smith


Every driver enjoys driving a vehicle that looks clean and shiny. This is the main reason why car washes have remained popular. There are people who wash their cars at home. However, this is possible if there are facilities required during cleaning process. A good Car Wash Edmonton should not only have the equipment required during washing process, but also security around the area should be tightened. A car wash can fall into one of the following categories.

Under the self service category, open bay is used during washing process. Open bays are areas where cars sit while being washed. Foaming brush and a pressure sprayer are used during the washing procedure. Foaming brush is normally connected to a central pump. Most sprayers in this case have dial system that is coin operated. The system is fitted with various options from, which one can choose depending on need. Some of options available are soap, wax and rinse.

Another category of carwash that is gaining popularity at a phenomenal rate is exterior rollover. The system is automated, making it very efficient. In order to wash your car, you are required to take it inside a given bay by simply driving it. A signal released, informs you when vehicle reaches a correct position. Washing is done certain pieces of equipment moves over vehicle. This category is gaining popularity day by day.

For exterior only category, vehicle is directed into a bay that looks like a tunnel. Within the tunnel, there is a conveyor belt over which, one of the tires, especially the front and the one nearest to the driver is positioned. The vehicle is then left neutral and washing process commences. The belt guides vehicle through the tunnel and after the cycle is completed, vehicle is left spotlessly clean.

In full service category, services of attendants are required. The initial part of the process is performed as it is done in exterior only system. Hand drying and wheel cleaning are the main cleaning process performed by attendants. However, for the case of detail shop, entire process is done by attendants.

Hand washing is not only tiresome, but also time consuming. If you intend to wash your entire vehicle, consider cleaning outer part in a day after interior part has been cleaned. This will make the entire process simple and straightforward. Consider cleaning the upper part of the vehicle as you move downwards. This is important to ensure that the entire process is done in the right manner.

Consider using different pieces of equipment while washing the wheels. This will not only prevent the other part of vehicle from being scratched, but also it will promote their cleanliness. Wheel brushes together with the soap are the main items used during the cleaning process. You may also consider using sprays when cleaning wheels.

When rinsing vehicle consider commencing process from the top. Microfiber towels are the best items to use while drying the vehicle. These kinds of towels are essential and prevent the outer part of vehicle from being scratched. Polishing is done immediately drying is complete. This is intended to restore the good look of vehicle. Waxing is done so as to enhance appropriate vehicle protection.




About the Author:



No comments:

Post a Comment